[T3] starter bushing problem,

[Keith Park]

Find a rod or dowel that just fits inside the bushing, grease it up with a
good thick grease, stuff some in the hole, insert the rod just a bit and
then hammer it the rest of the way, the bushing will pop out.

Im assuming these are in a blind hole, I recall they are but this method
wont work if the hole is drilled thru the bellhousing

Keith


Top Notch Restorations
topnotch at nycap.rr.com 
http://www.a383ina68.addr.com/radiorest/main.htm
71 Squareback "Hothe"
65 Notchback "El Baja Rojo"
65 Squareback "Eggcrate"
87 golf "Winterat"
93 RX7 "Redstur"

-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Fred
Simmons
Sent: Saturday, November 20, 2010 6:27 AM
To: type3-vwtype3.org at lists.vwtype3.org
Subject: [T3] starter bushing problem,






trying to get starter bushing out.
what a pita.

bentley says "remove it" -a big help
are there tricks / a tool available or what
i have already chewed it up quite lot with a tap.
any advice greatly appreciated.
fred '70 sqbk in los angeles


 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20101120
/749e37fa/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.