[T3] WTB 67 torsion arm bump stop brackt

[SAW DUST]

Thanks for the tip, I can totally do that. If I cant find one I will fix the one I have.













SAWDUST




> From: dave at hallvw.clara.co.uk
> To: type3 at vwtype3.org
> Date: Fri, 29 Oct 2010 00:59:24 +0100
> Subject: Re: [T3] WTB 67 torsion arm bump stop brackt
> 
> If it's just the button that has rusted away, you can cut another 'mushroom'
> from an old front axle and drill it for an M6 (1/4") bolt with a flat washer
> under the top and lock washer under the nut.  Grind the weld remains from
> the centre of the mount and it will sit comfortably on there.  
> 
> 
> Dave.
> UK VW Type 3&4 Club
> -------------
> 
> -----Original Message-----
> From: type3-vwtype3.org-bounces at lists.vwtype3.org
> [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of SAW DUST
> Sent: 28 October 2010 23:40
> To: VW TYPE 3 dot org
> Subject: Re: [T3] WTB 67 torsion arm bump stop brackt
> 
> 
> I need a rear bump stop bracket for the driver side on my 67 notch. The
> center metal part that holds the rubber has rusted and turned to dust. Can
> any one help me?  I would enclose a pic. but its not allowed , right??
> Thanks in advance!!
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> SAWDUST
> 
>  		 	   		  
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20101028
> /a03e7844/attachment.htm>
> _______________________________________________
> type3-vwtype3.org mailing list
> type3-vwtype3.org at lists.vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> 
> 
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Unsubscribe?  See http://www.vwtype3.org/list/
> Need list help? mailto:gregm at vwtype3.org
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20101029/251892b7/attachment.htm>