[T3] Intake Gasket Material

[Jim Adney]

On 31 Dec 2011 at 11:34, Jeremy Menzies wrote:

> I agree, I used a thin cake mix box cut out using the phenolic spacers
> as a template and they seem to be working pretty well.  I've read that
> the metal ones that are available as part of engine gasket kits are
> not right for the Type 3 intake runners, FYI. 

Good choice and good advice. The metal dual port intake gaskets are 
for Beetles. Note the extra hole for the dowel pin that only Beetle 
heads have.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************