[T3] Pneumatic screen washer Helphos Valve

[Dave Hall]

Thanks for Russ - I think it must be on there - I'll take a look next time I
recharge the reservoir.  It seems to be holding pressure so far.

Dave.
UK VW Type 3&4 Club
===================

-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Russ W
Sent: 01 February 2011 01:37
To: type3 at vwtype3.org
Subject: Re: [T3] Pneumatic screen washer Helphos Valve

On 1/30/2011 9:01 PM, Dave Hall wrote:
> Where does that go, Russ?  Jim thinks it's on the face of the spigot 
> to seal on the valve stem.  That looks possible, but I wouldn't say I 
> saw anything that looked soft on there - seemed like plastic to me, 
> but it can't fit insside the valve, so I guess it must seal on the face.
>
> Is there a seal that's dropped out or something?
>
> It was still working today.
>
It is like a small o'ring.  It is to seal the fitting against the end of the
valve stem.

--
Thanks,
Russ Wolfe
russw at classicvw.org

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.