[T3] FW: Coil, Calipers, and Front Beam

[Adriel Rowley]

----------------------------------------
> From: dave at hallvw.clara.co.uk
> To: type3 at vwtype3.org
> Date: Sat, 9 Jul 2011 11:03:34 +0100
> Subject: [T3] FW: Coil, Calipers, and Front Beam
>
> Sounds like the new 'upper' ball joints are lower ones. They have larger
> shafts.
>
Well, since I am almost sure I got them from Gary Ploof who has already 
scammed me about $100 (supposedly still alive and well, so not sure why I 
never heard back as previous transactions were great), just going to 
leave it the way it is.  Been too long to know what is what, and can 
always use lower ball joints. ;)

I did find this: http://www.eisparts.com/131498001.html.  Do you think 
this would work on our ball joints?  I like to reboot the uppers at 
least as they have a threaded hole for zerk fitting.

I got the beam all assembled except for the steering part and the 
mountings.  Like to know how to correct the middle mounts as I do not 
feel comfortable leaving them out or forcing them in.

Got to get to work, so will tell and ask later. ;)


Thank you so much!
Adriel