[T3] reIntroduce

[Adriel Rowley]

----------------------------------------
> From: jadney at vwtype3.org
> To: type3 at vwtype3.org
> Date: Sun, 24 Jul 2011 22:47:54 -0500
> Subject: Re: [T3] reIntroduce
>
> On 2011.07.11, at 1101am, Jim Adney wrote:
>
> That 8 mm (5/16") hose runs from the port on the pressure sensor to a
> similar port that points to the left and comes out on the underside
> of the intake air distributor. It can be hard to see or install, so
> it's pretty easy to overlook.
>
I have found on mine, the 5/16" hose on the I.A.D. nipple leaks like 
crazy, so had to clamp it way over tight.  Still need to get a better 
hose for it, and was thinking of going to 7mm, as was standard hose for
early F.I..  I would like not to use clamps on the F.I. hoses if I can,
especially when they are over tightened. ;/


Thank you,
Adriel