[T3] FW: Rear hanger bolts

Dave Hall dave at hallvw.clara.co.uk
Tue May 31 12:27:25 PDT 2011


 
M8 x 20mm DIN 933 for the mounts to body, M8 x 20mm for the engine carrier
to engine, and M8 x 35mm DIN 933 for the mount to engine carrier.  DIN 933
is the spec, and is 8.8 hex head galvanised.  The 3 you are looking for
don't give a spec, just the size, so presumably just mild steel, not HT. 

Dave
UK VW Type 3&4 Club
===================

-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Joe
Plowick III
Sent: 31 May 2011 01:35
To: type3 at vwtype3.org
Subject: [T3] Rear hanger bolts

Does anyone know what the size of the three bolts for the rear engine hanger
are?  I seem to have misplaced mine somewhere.

Thanks!
Joe P.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110530
/15dbdea3/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.




More information about the type3-vwtype3.org mailing list