[T3] Camber Problems

[Jim Adney]

On 10 Oct 2011 at 18:31, Brent Bottolfson wrote:

> Just a follow up here.  Today I installed a new beam, control arms, and 
> spindles.  Using the same setup I was before, I was able to get the 
> camber on both wheels exactly the same.  Since the front end is in the 
> air on jack stands, I set both wheels to +2.5*.  Hopefully when the rest 
> is back together it comes pretty close to spec.

That was a LOT of work, so maybe we can all breath now that we know 
it worked out okay. Congratulations.

> So in the end, I really think one of the control arms was bent just a 
> little.

It would be interesting to know exactly which part was bent.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************