[T3] idle cut off valves

[Dave Hall]

The Type 3 ones are marked 50g I believe (0.50 mm diameter) while the Beetle
ones I've seen were marked 45g (the 'g' represents which way the fuel flows
through, ISTR).

If you can't get the Type 3 ones, I suggest you try Beetle ones for size and
see if there are any fuel starvation or weak mixture problems.  Have a look
at the plugs or exhaust pipe for white deposits showing it's too lean.  At
least you're after a larger hole if anything.

Dave 
UK VW Type 3&4 Club
===================

-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of ken2k
Sent: 21 December 2012 17:46
To: type3-vwtype3.org at lists.vwtype3.org
Subject: [T3] idle cut off valves

are the idle cut off valves specific for the carburator or can i use  the
replacements available at places like mid america ??  thanks kk
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20121221
/e111b0d2/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.