[T3] BBQ Plans

Gary Forsmo gbforsmo at gmail.com
Sat May 12 20:02:46 PDT 2012


This thread was started for the Invasion BBQ, but I was reluctant to
change the subject line.

The subject has "morphed" to the Axle Beam Tow Bar/Base Plate.

Bob --
Actually, Blue Ox wanted nothing to do with this project.  Other than
to sell me the 4 Base Plate Connector "tabs" and a length of steel bar
that they use to space the connectors tabs the correct distance apart.

With the help of Jim A. and a friend who has a well-equipped garage in
the Madison area, we designed/engineered/fabricated the base plate
.... kinda "on the fly".

We built 2 (what I call) "saddles" that fit over the top axle beam
seam.  The 1/2'  "U" bolts rest on/in these saddles and that hardware
does not interfere with the steering box or pitman arm on the drivers
side; or the fuel pump, hoses, filter, etc. on the passengers side.

But Jim did remove the fuel pump mounting plate for easier
installation of the saddle and "U" bolt.  I may alter that plate to
accommodate a more secure mount for the fuel pump.  We're not quite at
that point yet.

But today we finished "tack welding" the steel (all 19 pieces, so
far), lowering the car onto the wheels and attaching the tow bar.

With everything connected (base plate to axle beam, axle beam to tow
bar, tow bar to (simulated) motor home, it all looks & fits great.

By connecting everything I could see how much of a drop hitch we need
to buy, to keep the tow bar arms (relatively) parallel to the ground
when towing.

Next thing: finish welding, hook up the Square and take it for a test drive.

Gary "Frito" - '69 Variant, FI, MT
Rockport, TX (winter)
Lake Geneva, WI (summer)



More information about the type3-vwtype3.org mailing list