[T3] Intake gaskets

[maroblll at coqui.net]

Bob;
I totally forgot to even consider doing both ends.  But the ones I need
are the ones at the carbed ends of the manifold.  You mention cereal box
and aviation glue and gosh, my brain (whatever's left) starts thinking
about the silliest jokes.  As always, thanks a lot Bob.
José

<-----Original Message----->
From: Bobsnotch at aol.com [type3 at vwtype3.org]
Sent: 10/10/2012 9:48:31 PM
To: type3 at vwtype3.org
Subject: Re: [T3] Intake gaskets


In a message dated 10/10/2012 9:42:24 P.M. Eastern Daylight Time, 
maroblll at coqui.net writes:

Hi there:

I've been looking for some intake gaskets for 32 PDSITs, single port.
Where can I get them? Any of you guys have any available for sale? I
could make my own, couldn't I? Thanks!



Are you meaning at the head end of the manifold? Or the carb end of the 
manifold?
If you mean the head end, you just need the large copper "O" ring out of
a 
gasket kit. 
If you mean the carbed end of the manifold, use a cereal box, and some 
aviation glue. 

Bob 65 Notch S with sunroof and IRS (Krusty)
64 T-34 Ghia (Wolfie)
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/2012
1010/eec37491/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.
.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20121010/ca6028e6/attachment.htm>