[T3] Crate stuff is back!

[Daniel Nohejl]

I have a bunch of 10mm case studs from a 1500 SP Type 1 case. I just started taking them out the other day so some are still in the case. I can send you a few to choose from and you can keep the rest for a rainy day. I don't plan on using this case again so no worries on my end. 

DN

On Oct 15, 2012, at 9:56 PM, Keith Park wrote:

> Rimco sent the stuff back, They cut the case 20 under, savered it, but
> unfortunately they cut the deck down where the cylinders rest, I did NOT
> want that done, I don't have time to mess with CR or valve train geometery
> etc. on a bone stock build.  Ive got to call them and see if I can find out
> how much they took off, it didn't need anything taken off and I don't think
> they cut much but..
> 
> They took the crank down .010, that looks fine, rods are bushed, cylinders
> look good, there are a couple slightly low spots but they thought that was
> OK and I really do want to use the originals again.
> 
> The only thing that really bummed me out is my coveted triple-walled Agilent
> Scope box disappeared!  They sent the stuff back in TWO boxes, and the
> shipping for the two was $$$
> 
> &#$^#@!!!
> 
> And I cant get those big boxes anymore.  Oh well!
> 
> I do need to get another cylinder stud together, I stripped the threads on
> one getting the head nut off, these are the early thick ones (10mm?)  anyone
> have an extra they can spare?
> 
> I want to get the case together this fall and then I can do the rest in the
> spring.
> 
> Keith
> 
> 
> Top Notch Restorations
> topnotch at nycap.rr.com 
> http://www.a383ina68.addr.com/radiorest/main.htm
> 71 Squareback "Hothe"
> 65 Notchback "El Baja Rojo"
> 65 Squareback "Eggcrate"
> 87 golf "Winterat"
> 93 RX7 "Redstur"
> 
> 
> 
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.