[T3] J16 relay ????

Daniel K. Du Vall dduvall at 1peter4-10.org
Sat Aug 10 08:21:23 PDT 2013


Terminal 86 had and has a white wire on it 85 has a brown wire.

"Daniel K. Du Vall" <dduvall at 1peter4-10.org> wrote:


OK the part number on the relay that was wired with the original wiring for J16 is VW 311 906 061.
Is this what should be?

Daniel Du Vall
http://1peter4-10.org
http://volkswageninsanity.us

-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Jim Adney
Sent: Saturday, August 10, 2013 6:14 AM
To: type3 at vwtype3.org
Subject: Re: [T3] J16 relay ????

Like you said, you probably have a mistake in the wiring somewhere....

On 10 Aug 2013 at 5:22, Daniel K. Du Vall wrote:

> I should note that if I pull the power to the coil (Only way to shut it off) as the engine dies and rpm drops that you can here at some point the relay clicks off. So if it's the generator how is it feeding back to the relay? Hmmm.

> -----Original Message-----
> From: type3-vwtype3.org-bounces at lists.vwtype3.org
> [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Jim
> Adney
> Sent: Friday, August 9, 2013 11:14 PM
> To: type3 at vwtype3.org
> Subject: Re: [T3] J16 relay ????
>
> On 10 Aug 2013 at 4:22, Daniel K. Du Vall wrote:
>
> > OK I probably wired something wrong but I am using the existing (J16
> > (Power supply relay for fuel injection) in my Megasquirt  conversion.
> > I left most the wiring the same except for the ones that used to go
> > to J21. I know my setup is not stock but is there a reason that this
> > relay would not turn off after the engine is started and then the
> > key is turned off? IT functions correctly as long as the engine is
> > not running.  Or did I miss understand what this really was used for
> > in its original setup?
>
> J16 is the FI main power relay. It should get power only from the ignition switch. If it doesn't shut off when you turn the key off, check for voltage at that terminal. Unplug that terminal and see if the relay then opens. It should. If it doesn't, the relay is sticking. if there's voltage on that terminal, it's being supplied from somewhere else. It's odd that they show wires leading to J21, because those wires just lead to the FI brain. There's no other relay there.
>
> It sounds like you might be getting power from the generator that holds the relay on when the key is off, but there should be no path for that to happen. The J16 relay coil should not get any power once the key is off.
>
> It's always possible that the relay is sticking, or that there's a problem with the ignition switch.
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.


--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.



More information about the type3-vwtype3.org mailing list