[T3] FI to injector wires

[J. Jonik]

 Sections of narrow ten-speed bike inner tubes work to cover the fuel pump plug and the Throttle Valve plug...but that would fit snugly over the Pressure Sensor plug too.  You can go the extra step of sewing or stapling up the part that wraps the cable if you want...or maybe just use a twisty wire to snug it up.
  Maybe narrower covers can be made from the inner tubes to cover injector and distributor plugs, etc.    This all won't last as long as the heavier rubber covers, but...the price is right.

FI to injector wires
Message-ID:
    <09343C2AF16F4241BB93BD1B5BB44B8433DAA1D8 at TEXAS.1peter4-10.org>
Content-Type: text/plain; charset="us-ascii"

Does
 anyone have any creative ideas on what to use as an alternative for the
 boots that cover the wire and connector to the injectors?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130205/77a2aeb9/attachment.htm>