[T3] 72 FI

[Max Welton]

--- On Fri, 1/18/13, Jim Adney <jadney at vwtype3.org> wrote:

>Other than the idle and WOT contacts, none of them show actual 
>position.

That's it then. MS needs a real 3-wire TPS.

Megasquirt uses the TPS signal for two things, the accelerator enrichment function (TPS rate of change) and the flood-clear function (TPS above 70% while cranking).

Now, MS _can_ use the MAP rate of change for the acc enrichment function. So in theory, you could run without a TPS at all. :-)

Max Welton
http://www.maxwelton2k.net/