[T3] More FI questions

Keith Park topnotch at nycap.rr.com
Mon Jan 21 07:36:24 PST 2013


PM me for all the info, remember if you crimp them you need to have the
special crimpers with the correct die or you will just create bad
connections.  You CAN solder them though, if you can solder well.

Keith
'

Top Notch Restorations
topnotch at nycap.rr.com 
http://www.a383ina68.addr.com/radiorest/main.htm
71 Squareback "Hothe"
65 Notchback "El Baja Rojo"
65 Squareback "Eggcrate"
87 golf "Winterat"
93 RX7 "Redstur"

-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Daniel K.
Du Vall
Sent: Monday, January 21, 2013 12:55 AM
To: type3 at vwtype3.org
Subject: Re: [T3] More FI questions

Keith what's your asking price on the connectors?
Do you have pictures? 
I currently have nothing so need everything. I am willing to crimp the ends
on but still need the plastic parts also. 

Daniel Du Vall
http://1peter4-10.org
http://volkswageninsanity.us


-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Keith Park
Sent: Saturday, January 19, 2013 10:56 AM
To: type3 at vwtype3.org
Subject: Re: [T3] More FI questions

Yes, I have the special FI inserts with the locking tab, as for the boots,
just rob some good ones off an old Golf at the junkyard.  In the desert they
may all be cooked even on those cars but up north the rubber usually holds
out OK.

Keith



 
Have you tried Keith for the small injector wiring connectors? He  has some.
Like Jim said, the white plastic pieces don't wear out. Since you're wanting
to go from the injector to the relay board, you might want to just get the
ends, that way you won't have any splices in your wiring. Someone on the

 Samba said the small wire connectors (without the plastic) are available
thru NAPA, and a couple of other places too (I just can't remember  where).
 
You could try putting up a WTB (Want To Buy) ad in the Samba classifieds for
the plastic pieces though. It might be worth a try.
 
Boots are available thru Auto Atlanta, but like Jim said, "pricey",  due to
them being a Porsche part (Auto Atlanta sells Porsche parts). If you  have a
"pick N pull" in your area, you might find the ends and boots on some  of
the water cooled VWs, and on some Volvo's, as Bosch parts were used on both.
I hope this helps.


Bob 65  Notch S w/Sunroof and IRS aka Krusty
64 T-34 Ghia aka Wolfie
71  Square-vert under  construction


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130119/8
23b367b/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.




More information about the type3-vwtype3.org mailing list