[T3] '73 FI harness

[Keith Park]

The small inserts are unique, their size isn't but getting them with the
locking tab on the back is the big problem.  I do have a stash of these,
The 2 pot boots aren't hard to find, the larger ones are but again, they are
out there and you can make do with silicone heat shrink if you need to.

Keith


Top Notch Restorations
topnotch at nycap.rr.com 
http://www.a383ina68.addr.com/radiorest/main.htm
71 Squareback "Hothe"
65 Notchback "El Baja Rojo"
65 Squareback "Eggcrate"
87 golf "Winterat"
93 RX7 "Redstur"

-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Gary
Forsmo
Sent: Tuesday, March 12, 2013 9:57 PM
To: type3 at vwtype3.org
Subject: Re: [T3] '73 FI harness

When I lived in Fond du Lac, WI the guys in our car club had a local
company which made entire, correct wire harnesses for all brands and
years of restoration cars.

Because I'm not entirely knowledgeable about the various connectors
which were used on our Type 3's, maybe someone can chime in.

Are there any unique connectors or can all, or most, of them be either
removed, recycled  from a harness and reused or can they be found at
our FLAPS?

Gary "Frito" - '69 Variant, FI, MT
Rockport, TX (winter)
Lake Geneva, WI (summer)
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.