[T3] Clutch fork!

[Keith Park]

The aftermarket stiff pressure plates will break the clutch arms, especially
the pre-71 ones without the guide sleeve.

 You need to get a reinforced arm assy in there or have yours welded up and
reinforced.

Keith


Top Notch Restorations
topnotch at nycap.rr.com 
http://www.a383ina68.addr.com/radiorest/main.htm
71 Squareback "Hothe"
65 Notchback "El Baja Rojo"
65 Squareback "Eggcrate"
87 golf "Winterat"
93 RX7 "Redstur"


-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Robert
Klein
Sent: Friday, November 29, 2013 8:22 PM
To: type3 at vwtype3.org
Subject: [T3] Clutch fork!


I have had 2 clutch forks break on me in less then 4000 miles. I don't need
to keep replacing these things it's a pain in the rear! I'm sure I have a
stronger then stock clutch but it isn't that are to push the peddle. Any
ideas of why this would keep happening? 
Sent from the desk of Robert Klein 

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.