[T3] EFI conversion

SAW DUST sawspatch at hotmail.com
Tue Oct 15 14:38:23 PDT 2013


Ok , I have a leed on a good complete Factory fuel pump bracket. My question, is there any difference between my 67 front beam vs. a later fuel injection model front beam ?

On Oct 13, 2013, at 10:01 PM, "Know One" <knowonelse at sbcglobal.net> wrote:

> A way to hopefully prevent or at least reduce oxidation on the inside of the tank would be to purge the backside of the weld. Since the tank would be filled with water, running a line from the weld gas tank into the fuel tank (somehow) wouldn't take too much gas.
> 
> Jeff '67 Sqbk
> 
> 
> #1a) You can go either route. The sump welded to the bottom of the tank  
>> would be a clean way to go about it, but it requires a lot of work to make  
>> sure you don't have any leaks. Also, welding on our fuel tanks can cause rust  
>> on the inside, and you really can't seal them very well.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20131013/a9a3f18a/attachment.htm>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.



More information about the type3-vwtype3.org mailing list