[T3] Glovebox

[John L. Morgan IV]

No, I want to do it the right way. Maybe, I just need to take a better
look at the lever that is in the car now. What in the world is holding
it in place if there is no glovebox? On the new one, the pull is attached
to the cardboard?!


On Thu, Oct 17, 2013 at 12:12 PM, Mike Fisher <fisherfarms at gmail.com> wrote:

> The seller went to the trouble of sending you a complete glove box/cable
> and you are gonna screw it up to do it the 'easy' way?
>
>
> On Thu, Oct 17, 2013 at 9:01 AM, John L. Morgan IV <
> emailjohnmorgan at gmail.com> wrote:
>
> > Am I better served in using the existing cable and handle assembly, which
> > works fine...or the new cable and handle assembly? I dont have a box at
> > all, and I hate to go and drill out the one I just got. Is removing the
> old
> > one an easy task?
> >
> >
> > On Thu, Oct 17, 2013 at 11:42 AM, <Bobsnotch at aol.com> wrote:
> >
> > > In a message dated 10/17/2013 10:31:52 A.M. Eastern Daylight Time,
> > > emailjohnmorgan at gmail.com writes:
> > >
> > > I got a new one.
> > > What is the best way to insert it?
> > > My  current cable and pull to open
> > > the trunk work fine.
> > > I see that there are  rivets that attach
> > > the new cable and pull to the cardboard.
> > > What is the  best order of operations
> > > to do this without messing anything  up?
> > >
> > >
> > >
> > > Are you going to re-use your existing cable and handle assembly? If
>  so,
> > > you'll have to drill out the rivets, and attach them to the new glove
> > box.
> > > Just so you know, there's a band underneath the box, held by 1  screw
> (it
> > > holds the glove box in place). Remove it, and the band, along with a
> >  screw
> > > (or 2 I think) on the inside of the old GB (it goes thru the  box/latch
> > > sideways into a support on the dash), then remove the box from  the
> back
> > > side of
> > > the dash. The new one will go in the same way, but in a  reverse order.
> > >
> > >
> > > Bob 65  Notch S w/Sunroof and IRS aka Krusty
> > > 64 T-34 Ghia aka Wolfie
> > > 71  Square-vert under  construction
> > >
> > >
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL: <
> > >
> >
> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20131017/0f3657ef/attachment.htm
> > > >
> > > _______________________________________________
> > > VWType3.Org mailing list - type3 at vwtype3.org
> > > http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> > > Contact gregm at vwtype3.org if you need help with the list.
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> >
> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20131017/d6e01826/attachment.htm
> > >
> > _______________________________________________
> > VWType3.Org mailing list - type3 at vwtype3.org
> > http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> > Contact gregm at vwtype3.org if you need help with the list.
> >
>
>
>
> --
> Eugene, Oregon
>
> http://s169.photobucket.com/albums/u236/mr_bojangles500/
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20131017/6fcc87ff/attachment.htm
> >
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20131017/82060d40/attachment.htm>