[T3] motor vibration.

[Jim Adney]

On 11 Jan 2014 at 14:02, Max Welton wrote:

> You replaced the pressure plate and did not rebalance the rotating 
> assembly. Sometimes you can get lucky doing this. Sometimes not.
> 
> Was there something wrong with the old PP? If you still have it, try reinstalling it.

When new, the crank, flywheel, and pressure plate all had marks that 
were oriented in a particular way when assembled, to get the best 
balance. Those marks were paint, or something similar, so they never 
survive this long, but it's always a good idea to mark your parts 
before you take them apart.

If you get your drive line balanced, they will stamp marks on 
everything so you can assemble them correctly.

You might be able to remove your pressure plate and get someone to 
just balance it. That might help.

There's no "bush" on the cooling fan. There's nothing back there to 
replace.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************