[T3] valve woes
B Fye
bfye at canyonville.net
Thu May 22 13:57:38 PDT 2014
This is why I suggested watching the valves move. Flat cams have very little motion on the valve train
Brian Fye
> On May 22, 2014, at 1:47 PM, Fiesta Cranberry <fiestacranberry at gmail.com> wrote:
>
> Ground cams are a big mistake, you lose the hardness layer. You can see if
> this is a problem thru the sump though, look at the lobes.
>
> We took off the oil filler plate, but there is a sort of another plate or
> dome above that that blocks off most vision to the inside. Lloyd says he
> could see the lifters and cam lobe, and they looked OK.
>
> What kind of damage, and how bad, would be caused by putting in longer
> pushrods?
>
> Lori
>
>
> --
> "I wrestled with reality for 36 years, and I'm happy to say I've finally
> won out over it."
> ---Elwood P. Dowd
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20140522/b2ee67ff/attachment.htm>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
More information about the type3-vwtype3.org
mailing list