[T3] Starter Question

[Dave Hall]

That's a starter originally made for an automatic - doesn't need the front
bushing, so that's one less thing to go wrong! Use it and enjoy!

Does it all work now?

Dave
UK VW Type 3&4 Club
===================

-----Original Message-----
From: type3-vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org]
On Behalf Of J. Jonik
Sent: 23 October 2014 19:29
To: Type 3
Subject: [T3] Starter Question

Putting "new" (used) starter into the car ('73 FI Std. engine).   Starter
passed its test at auto shop.
But...the "new" starter is bigger than the broken one, and it does not have
that "pin" that slides into the hole in the engine.   ( "Pin" is about half
inch diameter, and an inch and a half or so extending out from the gear.)

The new one fits nicely into the mounting, and gears seem to be compatible.
MUST the replacement be same as the old...with that "pin" ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20141023/f
81d5e10/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com