[T3] Idle cutoff valve

[Dave Hall]

311 129 413G (from the parts book) for the usual 12V 1600 dual carb with a
g50 jet.  If you have a 6V or an oddball Type 3 it may be a g45 jet.
I think you can disable the solenoid with the screw on the body to make it
work, but it won't shut off in that case - it's a bit less brutal than
cutting the needle off, eh John?

If you try a different one, check whether it shuts off without the power
connected!

Dave
UK VW Type 3&4 Club
===================

-----Original Message-----
From: type3-vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org]
On Behalf Of Craigs List
Sent: 08 August 2015 05:38
To: Type 3 List
Subject: [T3] Idle cutoff valve

What is the part number for the 32 pdsit cutoff valve? One of mine is acting
up. Time to replace it.

Adam
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150807/a
2bfc0f6/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus