[T3] Arcing

[B Fye]

My denso alt from a toyo forklift is still running strong.  Only 35amp so
it is fairly small too.

Brian
On Nov 14, 2015 12:02 PM, "Daniel K. Du Vall" <dduvall at 1peter4-10.org>
wrote:

> OK I saw that one and the same one the CB sit also. Was going to see if
> anyone had been using one.
>
> If you get a chance could you run through this see if you spot anything
> causing the sync loss?
>
> http://volkswageninsanity.us/Postings/FI/Tune&Logs/72SBMS-141115.zip
>
> Maybe I need to adjust the pots inside the MS3 back to all the way out.
>
> -----Original Message-----
> From: type3-vwtype3.org [mailto:
> type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Max Welton
> Sent: Saturday, November 14, 2015 1:20 PM
> To: type3 at vwtype3.org
> Subject: Re: [T3] Arcing
>
> I got the one John C. sells. It's a little expensive and the belt he sends
> with it was too small. But works very well and is internally regulated.
>
>
> http://vwparts.aircooled.net/CPR-s-12V-Alternator-Kit-55-Amp-Type-3-Engines-p/t3-alternator-conversion-kit.htm
>
>
>
> Max Welton http://www.maxwelton2k.net/
>
>
>       From: Daniel K. Du Vall <dduvall at 1peter4-10.org>
>  To: "type3 at vwtype3.org" <type3 at vwtype3.org>
>  Sent: Saturday, November 14, 2015 12:07 PM
>  Subject: Re: [T3] Arcing
>
> Yes.
> What altinater did you switch too?
>
> -----Original Message-----
> From: type3-vwtype3.org [mailto:
> type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Max Welton
> Sent: Saturday, November 14, 2015 12:58 PM
> To: type3 at vwtype3.org
> Subject: Re: [T3] Arcing
>
> The controller I have for my O2 sensor regulates what the sensor sees. And
> since I run my MS closed-loop, it is not really sensitive to variations in
> input (buss) voltage.
>
> Daniel, you are set up closed loop also, right?
>
> Max Welton http://www.maxwelton2k.net/
>       From: Mike Fisher <fisherfarms at gmail.com>
>  To: T3 List <type3 at vwtype3.org>
>  Sent: Saturday, November 14, 2015 11:23 AM
>  Subject: Re: [T3] Arcing
>
> Mine starts good (except when cold) /runs great with 13.5V so I have not
> even been chasing 14V.  ;-)
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20151114/a1ff7e28/attachment.htm
> >
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
> subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
> subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20151114/64373904/attachment.htm
> >
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
> subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20151114/2a778b3b/attachment.htm>