[T3] Big oil passages and big cooler

[B Fye]

That was it Jim, thanks!  My only reference parts are still together.

Brian
On Sep 5, 2015 4:00 PM, "Jim Adney" <jadney at vwtype3.org> wrote:

> On 5 Sep 2015 at 13:41, B Fye wrote:
>
> > Do I use the spacers and if so, how thick?
>
> With a late case (large oil passages and dual oil pressure valves)
> and the late oil cooler (311 B version, stamped on top of the cooler)
> you use the thin gaskets, typically red these days, and no spacers.
> However I find that to crush the gasket a bit too much for my taste,
> so I usually put 1 thin 6 mm wavy washer as a thin spacer between the
> case and the cooler, on each bolt/stud.
>
> If you've got different parts, the answer may be different.
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150905/032b68e0/attachment.htm>