[T3] 73 T3 IRS rear bearings?
William J
catnine09 at dslextreme.com
Fri Feb 5 19:47:41 PST 2016
I'll check if the nut is tight . I need to check the other side too just to
compare them.
That new cotter pin has been in there since I got this car in 85 . I never
bothered to check for play . I just noticed it by accident.
William
----- Original Message -----
From: "Keith Park" <topnotch at nycap.rr.com>
To: <type3 at vwtype3.org>
Sent: Friday, February 05, 2016 6:07 PM
Subject: Re: [T3] 73 T3 IRS rear bearings?
> There really shouldnt be any play, its a clamp fit with the bushing
> in the moddle so make sure that nut is torqued to where it should be, if
> its
> been loose, there may be things worn in there that need to be replaced
> if they have been chocking around but Id try tightening the nut first and
> see how it feels.
>
> Keith
>
>
> Topnotch Restorations
> topnotch at nycap.rr.com
> http://www.a383ina68.addr.com/radiorest/main.htm
> 71 Squareback "Hothe"
> 65 Notchback "El Baja Rojo"
> 93 RX7 "Redstur"
> 87 Golf "Winterat"
>
> HI all :
>
> I noticed the other day when I had the right rear jacked up that I could
> grab the tire front and rear and rock it about 1/8" at the tires edge and
> if
> I grabbed the tire top and bottom it moved the same amount. There is no
> in/ out movement . The play feels much like a loose front wheel bearing .
> Driving it I never hear any noise like a rough bearing . The outer is a
> roller
> and inner is a ball bearing.
>
> I did notice the right side has a new cotter pin so at some point before
> I
> got this car someone was in there for reason unknown.
>
> Can anyone tell me if this play is normal and if not what do I need to do
> hear > I looked in the Haynes manual and it shows this work done with the
> rear control arm on the car and no special tools other than a pipe to
> drive
>
> the roller bearing on the shaft.
>
> Has anyone done this that could help with what I might need?
>
> William
>
> I assume there should be no play is this correct? I could not find any
> info as to play in the Bentley just repacking the bearings .
>
> Keith would probably be the best one to answer this. I know he's repacked
> his at least once.
>
> Bob 65 Notch with sunroof
> -------------- next part --------------
>
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
More information about the type3-vwtype3.org
mailing list