[T3] fan rubbing something
Phil Hof
phil.hof at ostronic.org
Sun Feb 14 13:15:24 PST 2016
Anyone got spare fan shims? I put in a gasket and one shim, as I had taken those off, but it’s in a new case, so all bets are off.
I used new screws and lactate on the shroud attachment, so I doubt it’s that. Any other suggestions of why I have something rubbing in the shroud area after my rebuild?
I broke it in for 20 minutes but the rattly scarping noise needs attention. I didn’t hear or feel anything on the engine stand, but I gotta pull the shroud off and have a listen with a rubber hose during a short engine run. I can hear it through the fender cooling slots FAR more loudly than above the engine, so I know it’s not bearings and such.
Anyone had fan interference issues? Did you have to shim the shroud itself?
Lacking the VW tool, I eyeballed the front shroud for concentricity, which always worked for me in the past.
Never had this issue before.
Suggestions welcome!
Thanks,
-Phil
More information about the type3-vwtype3.org
mailing list