[T3] WS wiper position
Jim Adney
jadney at VWType3.org
Sat Feb 20 12:02:20 PST 2016
On 20 Feb 2016 at 9:50, Ralph Tree wrote:
> I removed the wiper assembly and serviced the pivots and replaced the plastic/nylon drive gear. Now when I turn the wipers off they go to the full up position. I've checked the wiring several times and everything seems fine.
> Do any of you smart guys have an idea of how I screwed this up?
When you put the motor back together, you didn't put the lever back
on the gearbox in the right position. You need to let the motor run
and then "park" itself in it's correct stopping position, then loosen
and reposition the lever, in the position where it places the wipers
properly when parked. This position is called out in the Bentley, but
assumes that the motor/gearbox is in the "park" position. When you
put things back together, the position was random, even tho it was
properly parked when you started.
CAUTION!!!!
Do not touch any of this without disconnecting the battery ground
cable. The park switch can catch you by surprise and the linkage is
perfectly capable of taking off a finger. This is not a silly
warning. This is real.
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************
More information about the type3-vwtype3.org
mailing list