[T3] Front Beam Stabilizer Question

[Keith Park]

thats not bad, paint then grease the whole thing, it wont rust again.

Keith

Topnotch Restorations
topnotch at nycap.rr.com
http://www.a383ina68.addr.com/radiorest/main.htm
71 Squareback  "Hothe"
65 Notchback  "El Baja Rojo"
93 RX7  "Redstur"
87 Golf  "Winterat"
 
-----Original Message-----
From: type3-vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org]
On Behalf Of Tim Shreve
Sent: Friday, July 08, 2016 6:24 PM
To: type3 at vwtype3.org
Subject: [T3] Front Beam Stabilizer Question

After Keith's tech session at the invasion, I started in on a couple beam
rebuilds that I had been putting off.  One of the Stabilizer bars that I
removed had a small rust spot on it.  I cleaned it up and it now looks as
shown in this picture:

 

http://s95.photobucket.com/user/type3tim/media/Beam%20Rebuild/20160707_15535
8077_iOS_zpsovtqnxlw.jpg.html?sort=3
<http://s95.photobucket.com/user/type3tim/media/Beam%20Rebuild/20160707_1553
58077_iOS_zpsovtqnxlw.jpg.html?sort=3&o=1> &o=1

 

http://s95.photobucket.com/user/type3tim/media/Beam%20Rebuild/20160707_15541
1947_iOS_zps3s2fl9nx.jpg.html?sort=3
<http://s95.photobucket.com/user/type3tim/media/Beam%20Rebuild/20160707_1554
11947_iOS_zps3s2fl9nx.jpg.html?sort=3&o=0> &o=0

 

1)      Is this small spot significant?

2)      What is a good "near to OEM" material to recoat this spot on the
Stabilizer Bar.

Thanks.

 

//////////////////////////

Tim Shreve

Type3tim at cox.net <mailto:Type3tim at cox.net> 

\\\\\\\\\\\\\\\\\\\\\\\\\\

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20160708/7
74a21c8/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org