[T3] under the cylinder cooling tin

[ken2k]

 My 66 type 34 was rebuilt a few years ago and it starts right up, idles perfect and drives great.however, after driving it takes a few hours to cool down enough to start again. I noticedthat the tin under the cylinders is not the same as I am used to, it doesn't wrap around the side of the cylinders. my question is could this be the cause ofit running hot and can it be fixed  using the spring loaded push rod tubes. thx kk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20160613/e7a84be1/attachment.htm>