[T3] type3-vwtype3.org Digest, Vol 79, Issue 6

[Jim Adney]

On 9 Apr 2017 at 22:02, Bobsnotch at aol.com wrote:

> In a message dated 4/9/2017 6:16:00 P.M. Eastern Daylight Time,  
> vwfye311 at gmail.com writes:
> 
> Well,  since I have the switch on the trans and bulbs in the holders, where
> do I  need to run wires to and from?
> From the coil + to the black fuse holder, from there to the trans  switch, 
> out of the trans switch to a "T" that goes to the tail lights. Those  wires 
> should be 14 gage or something similar in size, and black in color  (stock).
> I hope this helps.

14 AWG is WAY bigger than necessary. 18 AWG, or maybe even 20, should 
be fine.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************