[T3] throttle valve switch

[Jim Adney]

On 27 Apr 2017 at 17:49, KENNETH ROGERS wrote:

> The manual says when adjusting throttle valve switch use an ohm meter
> to check switch unplugged. I used THIS method, turn key on and adjust
> counter clockwise the TVS. Move forward till you hear the click.
> Adjust 2 degrees clock wise and set. OK, with you? 

The manual is wrong here. Their method is only correct for '68-9. There are 
3 different types of TVSs used on Type 3s and each is adjusted somewhat 
differently.

I'm sending you my writeup on adjusting the TVS.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************