[T3] Tie Rod Ends....
J. Jonik
j_jonik at yahoo.com
Fri Jun 2 12:53:17 PDT 2017
Which way does the tie rod end (driver side, the one linked to the wheel) screw INTO its tie rod? Clockwise or counter-clockwise?
Since I can't yet undo the ends from the tie rod, I can't tell. I don't want to be trying, with much effort, to turn it in the wrong direction. With the tiny one (difficult) revolution I got out of it, I can't tell if the rod end is coming out or going in.
Muir and Bentley manuals aren't clear on this.
Subject: Re: [T3] Tie Rod Ends
Message-ID: <5930EBB8.32529.101DBF6 at jadney.vwtype3.org>
Content-Type: text/plain; charset=US-ASCII
Jim Adney wrote:
Go to ebay.com and search for:
tie rod end (remover, extractor, press)
This will give you a bunch of possible tools. Ignore the pickle fork
style, as those work, but they destroy the tie rod end. The simple
screw press style is what works for me, but the teeter-totter style
should work just as easily.
There are lots of choices on ebay, but the ones I like all seem to
come from the UK. They are cheap, but shipping will probably take
longer than you want. So, with the idea in mind, see if there's a
place in your town that rents tools; they may have something useful.
I don't have an answer to your one revolution problem, unless you're
turning it the wrong way. Remember one end has a left hand thread.
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
More information about the type3-vwtype3.org
mailing list