[T3] Steering box play

Jim Adney jadney at vwtype3.org
Sun Mar 26 20:04:01 PDT 2017


On 26 Mar 2017 at 20:31, Sean Bartnik wrote:

> Up-and-down play at the shaft the drop arm bolts to (aka the roller
> shaft) is adjustable via the small adjuster screw on the top cover of
> the steering box.  

That's not quite right. The adjustment screw should be captured in 
the top of the shaft by a snap ring. The amount of play in there is 
adjusted by exchanging shims. You're supposed to chose a shim that 
allows the screw to turn in the shaft with minimum play. See the 
Bentley, Ch 7, pg. 35. There's a very good photo, Fig. 10-22.

It's possible that the aftermarket TRW steering boxes have eliminated 
this feature. I can see that this would be one way to make the boxes 
cheaper.  

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************

-------------- next part --------------
A non-text attachment was scrubbed...
Name: WPM$UF37.PM$
Type: application/octet-stream
Size: 712 bytes
Desc: Mail message body
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20170326/0a03d696/attachment.obj>



More information about the type3-vwtype3.org mailing list