[T3] Vacuum lines?

[William Jahn]

 Jim sounds good , I have the 4 short runner hoses yet I might need the 4
small injector seals since they have been there since 2009 if you have new
ones. If you do let know and what they cost . I just want to remove the IAD
clean the inside and outside and replace the runner hoses and head gaskets
and the vacuum lines that connect to the IAD just to rule out any possible
vacuum leaks that may be causing this IAD temp sensor issue I have. The
runner hoses have been on it since 97 as have the head gaskets. Also I want
to make certain the IAD back cover has a good seal and just to see if the
73 IAD is in better shape than the one off the 72 which is on the engine
now. If I recall I used the old gasket and used silicone sealer on it. I
know that gasket can be made if need be.

 I just need your address so I can send a check since I don't have paypal .

 Thank you

William

On Tue, Apr 9, 2019 at 9:53 AM Jim Adney <jadney at vwtype3.org> wrote:

> On 8 Apr 2019 at 16:53, William Jahn wrote:
>
> >  I think it's time to replace the FI runner hoses and it looks like
> > removing the IAD is pretty difficult without removing the runners ,
> > trouble is I don't know if the runner to head gaskets are ok and can't
> > seem to locate them . Anyone have 2 of them?
>
> I have them in stock. $13 each, NOS OG. Shipping would bring it to $30. If
> there are other small things you need, this would be a good time to think
> about them.
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20190409/4098a00e/attachment.html>