[T3] 73 square front foot well/defrost cable?

[William Jahn]

The plate was silver , both cables were fine in the connector so it must be
broken between the level and connector. I didn't try to find where.

I also replaced the gen belt . Counted 7 shims and needed 8 between the
pulleys so the Gates 7390 belt would fit with 5/8" play center of belt. I
had a few spares so I added one more and put one between the hat and outer
pulley. Then when I was done I saw one down at the bottom of the black
pulley housing so I must have had 8 instead of seven. I removed them with a
magnet I have no idea how I dropped one , glad I saw it could have found
it's way into the big  fan  maybe or got caught in the belt. I don't know
how many shims come stock I like one under the hat and still see 3 full gen
threads past the nut.

On Mon, Dec 9, 2019 at 1:24 PM Jim Adney <jadney at vwtype3.org> wrote:

> On 9 Dec 2019 at 12:21, William Jahn wrote:
>
> > Jim I think I recall those plates they are black and about 2"x 4" and fit
> > on the tar board.
>
> I don't recall the color, but that's about the right size and shape. I
> believe
> mine were getting rusty, so I made new ones from stainless or titanium
> scrap
> from work.
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20191209/6f8fa4e8/attachment.html>