[T3] Shrink Tube

[Keith Park]

Gary, If you just need a piece of 2-3" diameter shrink I have some lying
around
I could cut you off a chunk, I don't know the % shrinkage though, its just
the "Standard stuff"

Keith
 


Topnotch Restorations
topnotch at nycap.rr.com
http://www.topnotchresto.com
71 Squareback  "Hothe"
65 Notchback  "El Baja Rojo"
93 RX7  "Redstur"
95 Chrysler Cirrus Lxi "Cirfogsalot"
"hanging out at the tail end of the bell
curve, and loving every minute of it!" 

-----Original Message-----
From: type3-vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org]
On Behalf Of Gary Forsmo
Sent: Friday, December 27, 2019 7:50 PM
To: type3 at vwtype3.org
Subject: Re: [T3] Shrink Tube

The need for large-diameter piece of Shrink Tube is to:
1.)  strengthen an electrical/mechanical (110 VAC   ceramic bulb holder to
a wood pole) connection &
2.)  insulate the exposed hot/neutral/ground connectors from accidently
touching them.

Radio Shack?  FLAPS?  Other good reliable source?

I didn't know that the greater % of shrinkage affected the cost. But that
make sence.
Also I don't need 50' of shrink tube.


--
Gary "Frito" - '69 Squareback, FI, MT, One-owner Rockport, TX (winter) Lake
Geneva, WI (summer)
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20191227/f
7358018/attachment.html>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org