[T3] Battery Hold Down Strap
Jim Adney
jadney at vwtype3.org
Wed Oct 9 13:01:57 PDT 2019
On 9 Oct 2019 at 11:28, Gary Forsmo wrote:
> Was the OEM Battery Hold Down Strap for our Type 3's revised to use a
> "Plate", Washer and 10mm (?) Nut after 1965?
> My '69 Square has a stud mounted in the floor pan, that the
> plate/washer/nut fastens to.
6 V VWs had an insulated steel cover over the top of the battery and a 2 part
strap with a "buckle" that went from one side to the other. The 12 V batteries,
'67 and later, had a lip on the bottom that served to hold the battery in place
with the 8 mm plate, washer, and nut that you're used to.
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************
More information about the type3-vwtype3.org
mailing list