[T3] Hood adjustment

Jeff C knowonelse at gmail.com
Sun Apr 12 21:17:44 PDT 2020


The bolts that attach the hood to the hinge have some slop in them.
Loosen them up and you can re-position the hood within the opening.

I just did this a few months ago and it made a huge difference.

Jeff '67 Sqbk

On Sun, Apr 12, 2020 at 8:28 PM Steven Green <greenstevenmr at gmail.com>
wrote:

> Hi Guys
>
> I had to swap my 71 fastback hood for another hood due to the front being
> rotted out and I can't seem to get it to fit nicely.
> The scuttle edge has the same gap, but it has a gap on the right front side
> all the way along and the left is really snug.
> Is there some adjustment somewhere other than the 2 rubber stoppers?
>
> Regards
> Steve
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200413/632c61e4/attachment.html
> >
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200412/01bb70bf/attachment.html>


More information about the type3-vwtype3.org mailing list