[T3] Inner lower bushing dimensions?

Keith Park topnotch at nycap.rr.com
Fri Aug 28 18:50:16 PDT 2020


I probably have a pair, they are bakelite. problem is the square is apart
and against that wall, Ill see if I can crawl over when im back,

Keith

Topnotch Restorations
topnotch at nycap.rr.com
http://www.topnotchresto.com
71 Squareback  "Hothe"
65 Notchback  "El Baja Rojo"
93 RX7  "Redstur"
13 Subaru Outback "Blendin"
 

-----Original Message-----
From: type3-vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org]
On Behalf Of Max Welton
Sent: Friday, August 28, 2020 6:58 PM
To: type3 at vwtype3.org
Subject: Re: [T3] Inner lower bushing dimensions?

As far as I know it hasn't been possible to obtain a new beam for decades.
I am not above using extra-bentley methods to save mine. I'm certainly
willing to make something I can't buy.

https://www.thesamba.com/vw/gallery/pix/1466366.jpg

But I appreciate the information Dave. ;-)

Max



On Fri, Aug 28, 2020 at 1:49 PM Dave Hall <dave at hallvw.clara.co.uk> wrote:

> I've not done work on my front beam, but the info you want is in the
> manuals
> I have.
>
> The factory manual says " The plastic sleeves are not wearing parts and
> remain in axle beam".  Bentley says if the plastic sleeves are damaged, a
> new beam is needed.
>
> If yours have been cooked, I'm not sure what can be done for the upper
> tube.
> There are no bushes or plastic sleeves in the lower tube.
> The lower bores are 50mm OD, or 50.2mm oversize.
>
> Bentley shows the details.
>
> Dave,
> UK VW Type 3&4 Club.
>
>
> -----Original Message-----
> From: type3-vwtype3.org <type3-vwtype3.org-bounces at lists.vwtype3.org> On
> Behalf Of Max Welton
> Sent: 28 August 2020 02:39
> To: type3 at vwtype3.org
> Subject: Re: [T3] Inner lower bushing dimensions?
>
> Could be.
>
> In 2016 I had upper inner bushings made from oil-impregnated bronze and
> still have some material left. The guy that made them is going to make me
> some for the lower beam.
>
> Max
>
>
> On Thu, Aug 27, 2020 at 5:15 PM Keith Park <topnotch at nycap.rr.com> wrote:
>
> > check the samba, Ive seen bushings from time to time on the samba, I
> > dont think the beetle used them anywhere.
> >
> > Keith
> >
> >
> >
> > The trip through the powder coat oven killed the inner bushinng. They
> > don't appear to have been the stock ones but the while things ISP sells.
> >
> > I still have some of the bronze we used to make for the upper bushings
> > and I think I'll do that again.
> >
> > Since the lower needle bearings are the same as type-1, are the inner
> > bushings also the same? What is the OD of those?
> >
> > Max
> > -------------- next part -------------- An HTML attachment was
> > scrubbed...
> > URL:
> > <
> > http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200
> > 827/0
> > 2025d47/attachment.html
> > <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/2020
> > 0827/02025d47/attachment.html>
> > >
> > _______________________________________________
> > VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
> > subscription options, visit:
> > http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> > If you need more help, contact: gregm at vwtype3.org
> >
> > _______________________________________________
> > VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
> > subscription options, visit:
> > http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> > If you need more help, contact: gregm at vwtype3.org
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <
>
http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200827/9
> a5f44e0/attachment.html
>
<http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200827/9
a5f44e0/attachment.html>
> >
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
> subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200828/7
f80d050/attachment.html>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org




More information about the type3-vwtype3.org mailing list