[T3] Transmission cross shaft

[Jim Adney]

On 8 Jun 2020 at 20:54, Joe Plowick III wrote:

> The arms on mine don't look like they are parallel any more.  There is a
> chance that I could make it work if needed.  However, back when the car was
> running, I had a throwout bearing go and took out the pressure plate as
> well as punched a small hole in the housing behind the spring.  Lots of
> carnage.  Lol.  Don't recall what the cause was though.  The bushings are
> definitely destroyed, especially from me trying to get them out.

John at Aircooled.net always tries to carry good parts. He has several kits 
available, but I don't see an appropriate one marked for '69 Type 3s. The 
one for '69 Beetles should work, but you could email or call to make sure. I'd 
avoid the ones with the urethane bushings; get the bronze bushings and use 
good grease on them.

Looking back at your posts, I don't see why I thought yours was a '69, but in 
most cases, Beetles and Type 3s of the same year used the same cross 
shaft.  

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************