[T3] Need "hanger plate/bar bracket" L and R side for 1968 swingaxle notchback

[bobsnotch at aol.com]

You'll have to get another bar and replace it. For the short term, you could jack it up and weld it back together. A good muffler shop could weld it if you don't have a welder.Bob 65 Notch S with sunroof
 
 
 
-----Original Message-----
From: J L Stamey <jlstamey at gmail.com>
To: type3-vwtype3.org <type3-vwtype3.org at lists.vwtype3.org>
Sent: Mon, Mar 9, 2020 11:51 am
Subject: [T3] Need "hanger plate/bar bracket" L and R side for 1968 swingaxle notchback

Got the car tuned up and ready to roll yesterday. On way back from gas
station I heard a pop and a grinding or dragging sound. Pulled over
and noticed right side of engine was WAY low. Looked up underneath and
immediately noticed the hanger bar or bracket had snapped in 2!
I figured while I am in there, may as well replace both sides!

Looked around on ISP and a few other sources, all I see is IRS brackets.

pic of the motor drooping on the right:
https://www.thesamba.com/vw/gallery/pix/2009130.jpg

pic of the bracket piece I need (attaches to underside of engine area
with 2 large, maybe 17mm or 19mm, bolts)
https://www.thesamba.com/vw/gallery/pix/2009131.jpg

Anyone know how to get these and any tips or tricks to installing them?

Many thanks!
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200309/f023432a/attachment.html>