[T3] hanger bar on 68 notchback

William Jahn willjahn975 at gmail.com
Thu Mar 12 08:46:40 PDT 2020


wouldn't there be at least be signs on the original swing axle rear engine
mount that was welded to the rear of the engine opening if it was changed
to an IRS?

On Thu, Mar 12, 2020 at 8:40 AM Jeff C <knowonelse at gmail.com> wrote:

> >
> > I took a picture of my '67 swing axle from about the same position as the
> > picture posted earlier.
>
> Note that just behind the rubber bumper is a large diameter tube which
> houses the axle inside.
> I noticed that on the original picture at the lower right a CV boot can be
> seen, which is only found on IRS axles.
> There is no equivalent boot on the swing axle.
>
> https://www.thesamba.com/vw/gallery/pix/2010333.jpg
>
> Original picture
> https://www.thesamba.com/vw/gallery/pix/2009131.jpg
>
> Jeff '67 Sqbk
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200312/29f18f18/attachment.html
> >
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200312/41fd8715/attachment.html>


More information about the type3-vwtype3.org mailing list