[T3] Bracket bolt

[Brion Sabbatino]

I use a shop vacuum. Add small tubing to the large vacuum hose. It is probably not good for the vacuum but is only for a short duration of use.
________________________________
From: type3-vwtype3.org <type3-vwtype3.org-bounces at lists.vwtype3.org> on behalf of Jim Adney <jadney at vwtype3.org>
Sent: Wednesday, May 27, 2020 7:54:22 AM
To: type3 at vwtype3.org <type3 at vwtype3.org>
Subject: Re: [T3] Bracket bolt

On 26 May 2020 at 22:16, charles tupper wrote:

> Are there any 6mm tin screws on the front (transmission end) of the
> aside from the one that holds the one far left that attaches the front
> Tim to the cylinder head tin?

Yes, I believe there's 1 hidden down deep in front of #3 cylinder. There are
also 3 aft of #4.

> Oh...a plus. Found a mouse best in there...so, really have to pop the
> tin now! Just about there. I've invented some new cuss words today.

Ah yes, always good to get rid of those. You should probably check the right
hand side, too. With some effort you can get a lot of that stuff out with a stiff
hooked wire and some determination.


--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200527/c1788b8d/attachment.html>