[T3] Bracket bolt

charles tupper bbfn_o51951 at yahoo.com
Wed May 27 13:41:38 PDT 2020


The last 6mm tinware screw had to be "surgically extracted" in order to remove the tin. Not too ugly, I'll replace with a brass machine bolt, washers and nut to hold it all tight.

Sent from Yahoo Mail on Android 
 
  On Wed, May 27, 2020 at 12:39, Brion Sabbatino<brionsab at msn.com> wrote:   I have used 1/2" tubing and a section of garden hose before. For the small shop vac I can go to 1/4".

On 27 May 2020 at 14:55, Brion Sabbatino wrote:

> I use a shop vacuum. Add small tubing to the large vacuum hose. It is
> probably not good for the vacuum but is only for a short duration of use.

Sounds like a good way to get in there and get a mouse nest out. How small
a hose do you use?

--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200527/28bcdcce/attachment.html>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200527/125f6848/attachment.html>


More information about the type3-vwtype3.org mailing list