[T3] AN fittings
Keith Park
topnotch at nycap.rr.com
Mon May 31 09:57:19 PDT 2021
Well, thats what I did... hopefully THIS time...
Keith
Topnotch Restorations
topnotch at nycap.rr.com
http://www.topnotchresto.com
71 Squareback Hothe
65 Notchback El Baja Rojo
93 RX7 Redstur
13 Subaru Outback "Blendin"
-----Original Message-----
From: type3-vwtype3.org <type3-vwtype3.org-bounces at lists.vwtype3.org> On
Behalf Of Jim Adney
Sent: Monday, May 31, 2021 11:46 AM
To: type3 at vwtype3.org
Subject: Re: [T3] AN fittings
On 31 May 2021 at 7:29, Hal Sullivan wrote:
> Other than being a PITA to assemble, I've never had a problem with the
> Eaton/Aeroquip Socketless hose/fitting system. It doesn't have the
> fancy/shiny stainless braid or teflon lining to the hose that screams
> "hot rod!" and the fittings are plain boring brass, but it was very
> reasonably priced for the pieces at the local hydraulics shop and in
> ten years I've had no leaks and no failures.
>
> https://www.eaton.com/ecm/groups/public/@pub/@eaton/@hyd/documents/con
> tent/pll_1038.pdf
I've always wondered how the Socketless line of hose/connectors worked.
Good to hear that they are as good as advertized. I completely agree that AN
style fittings are usually unnecessary for our use.
For AN style fittings, here's a link to a different Aeroquip catalog. I
don't see the descriptions I thought I remembered in my very old paper
version, but there are assembly instructions on page 44. They are worth
studying, as they are not as obvious as one might hope.
https://is.gd/4Eicq7
There was a very short period when I was able to buy -5 (5/16") Aeroquip
fuel hose that was perfect for our cars, reasonably priced, and very high
quality. Then Aeroquip discontinued that size....
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org
More information about the type3-vwtype3.org
mailing list