[T3] Whats a good 36mm socket
Jim Adney
jadney at vwtype3.org
Fri Jan 14 20:07:18 PST 2022
On 14 Jan 2022 at 15:36, William Jahn wrote:
> To remove the gland nut on an auto trans engine?
>
> Short 6 point ?
I use one with a 3/4" drive. Half inch drive is a bit small for this amount of
torque. You'll also need some way to hold the AT drive plate while you torque
the gland nut. The trick of stuffing the #1 or #3 cylinder full of rope via the
spark plug hole is a good way to do this. Try to use enough rope to stop the
piston halfway up.
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************
More information about the type3-vwtype3.org
mailing list