[T3] Whats a good 36mm socket

William Jahn willjahn975 at gmail.com
Sat Jan 15 10:43:04 PST 2022

I don't know anyone who I can borrow a big torque wrench from. I was still
working at Ford plenty of techs. No place here I can get a loaner from only
 Saw one youtube video where a fellow used his 1/2" impact and red lock
tight to tighten the gland bolt , can't say if I trust that. All the videos
I saw were all 4 speed either using that torque myster and a flywheel lock
or a huge torque wrench all were 1/2" drive sockets or 3/8
 using the high dollar torque tool. I've never seen one auto trans.

On Sat, Jan 15, 2022 at 6:07 AM Jim Adney <jadney at vwtype3.org> wrote:

> On 14 Jan 2022 at 21:52, William Jahn wrote:
> > Last time I used a 1/2" drive impact and borrowed a 1/2 drive socket to
> > remove the gland bolt . To reinstall it I borrowed the same sock and a
> > snap-on 1/2" torque wrench and used angle iron I drilled to fit 2 of the
> > three flex plate holes.
> They why not do the same thing again?
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20220115/e41b33e7/attachment.html>

More information about the type3-vwtype3.org mailing list