<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=US-ASCII" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 9.00.8112.16457"></HEAD>
<BODY style="FONT-FAMILY: Arial; COLOR: #000000; FONT-SIZE: 10pt" id=role_body
bottomMargin=7 leftMargin=7 rightMargin=7 topMargin=7><FONT id=role_document
color=#000000 size=2 face=Arial>
<DIV>In a message dated 1/18/2013 10:15:23 P.M. Eastern Standard Time,
dduvall@1peter4-10.org writes:</DIV>
<DIV>
<BLOCKQUOTE style="PADDING-LEFT: 10px; MARGIN-LEFT: 10px">
<DIV><FONT style="BACKGROUND-COLOR: transparent" color=#000000 size=2
face=Arial>OK figured I would throw this one out here also.<BR>Anyone have a
D-jet injector harness that they would be willing to part with?<BR>I am mostly
interested in the Injector plug with possibly enough wire to use to make my
own harness to a relay/connection board I am building for the
MegaSquirt(r)</FONT></DIV><FONT style="BACKGROUND-COLOR: transparent"
color=#000000 size=2 face=Arial></FONT></BLOCKQUOTE>
<BLOCKQUOTE style="PADDING-LEFT: 10px; MARGIN-LEFT: 10px">
<DIV><FONT style="BACKGROUND-COLOR: transparent" color=#000000 size=2
face=Arial></FONT> </DIV>
<DIV><FONT style="BACKGROUND-COLOR: transparent" color=#000000 size=2
face=Arial>Have you tried Keith for the small injector wiring connectors? He
has some. Like Jim said, the white plastic pieces don't wear out. Since you're
wanting to go from the injector to the relay board, you might want to just get
the ends, that way you won't have any splices in your wiring. Someone on the
Samba said the small wire connectors (without the plastic) are available
thru NAPA, and a couple of other places too (I just can't remember
where).</FONT></DIV>
<DIV> </DIV>
<DIV>You could try putting up a WTB (Want To Buy) ad in the Samba classifieds
for the plastic pieces though. It might be worth a try.</DIV>
<DIV><FONT style="BACKGROUND-COLOR: transparent" color=#000000 size=2
face=Arial></FONT> </DIV>
<DIV><FONT style="BACKGROUND-COLOR: transparent" color=#000000 size=2
face=Arial>Boots are available thru Auto Atlanta, but like Jim said, "pricey",
due to them being a Porsche part (Auto Atlanta sells Porsche parts). If you
have a "pick N pull" in your area, you might find the ends and boots on some
of the water cooled VWs, and on some Volvo's, as Bosch parts were used on
both. I hope this helps.</DIV>
<DIV><BR>
<DIV> </DIV>
<DIV><FONT lang=0 size=2 face=Arial FAMILY="SANSSERIF" PTSIZE="10">Bob 65
Notch S w/Sunroof and IRS aka Krusty<BR>64 T-34 Ghia aka Wolfie<BR>71
Square-vert under
construction</FONT></DIV></DIV></FONT></BLOCKQUOTE></DIV></FONT></BODY></HTML>